7-PIN MOTOR CABLE CONNECTOR

Kupo PLS-4207 multiple connectors are often applied to combine chain hoist power and control cable as one. It makes a safe, compact and quick setup rigging. Two rugged die cast aluminum alloy half shells in black non-conductive finish for easy cable assembly. Hard gold plated contacts in soldering version and fully compatible with Socapax SL37 family. The extended female ground contacts allow making first / breaking last.


Electrical Characteristics
Rated Current/voltage 6 x 25A + 1 x 50A 250V
Operation Limit Voltage (Ac. V. Rms) 250
Withstanding Voltage (Ac. V. Rms) 2000
Insulation Resistance (MΩMin) At Dc 500V 2000
Contact Resistance (MΩMin) At Dc 1a 3
Number Of Contacts: 7 Contacts 6 x 16AWG + 1 x 12AWG

PIN-OUT FOR 7PIN MOTOR CONNECTOR:
PINOUT
1 = L1
2 = L2
3 = L3
4 = MOTOR UP
5 = GROUND
6 = MOTOR COMMON
7 = MOTOR DOWN
- Operating Temperature: -40 + 85°C
- Hipot Test: 1800 Vac / min
- Terminal Wear: 5000 + Connections
 
Important Note:
There is no industry standard wiring for chain hoist using 7pin connector. Since mixing gear from different suppliers is a common practice, you should always double check the equipment and not assume the wiring is correct or has been changed. 7-pin connectors carry power and control together and there is a potential for harming the equipment or the operator if the wiring configuration is not confirmed.
Suggested Price
$0.00

Applicable Promotions

Add to Wishlist
Description

Features

KUPO 7-PIN Motor Cable Connector
The reinforced locating tab on insert disk and keyway offer a spinning resistance.
KUPO 7-PIN Motor Cable Connector
Casting shell inside with a body grounding boss guarantees full safety.
KUPO 7-PIN Motor Cable Connector
The standard line connectors come with 3 different size compression strain reliefs.

KUPO 7-PIN Motor Cable Connector

Video
Download
Added to Cart
Shopping Cart Updated
Network error, please try again!